Articles Coating

1) Ensure that anyone moving the press is wearing the correct protective clothing. This may include:

• Steel toe boots
• Heavy duty grip gloves
• Back support belt

制药公司在线和离线包装产品时应遵循以下建议指南。

To prevent any contamination to the processing area or inside the building, it is important to learn the procedure for changing clothes during entry and exit through the company’s changing areas.

Color-coding can identify the personnel and their department. Color-coding for the first change room and primary change room is as indicated below:

A standard operating procedure (SOP) is a written instruction describing how a routine task is to be carried out; when, where and by whom. SOPs play a fundamental role in continuous quality assurance and ensuring best practice for your company, in order to assist you in protecting the safety of your patients and members of the public. The implementation of SOPs, which are specific to your production facility, will help you to:

There are many factors to be considered in the quest for drug quality assurance.These include environmental moisture, stability and packaging solutions.If all of these aspects are addressed throughout the manufacturing and storage processes, the product can be isolated and protected from all possible threats to quality and efficacy.

A rapid mix granulator is a multi-purpose mixer/processor equally suitable for high speed dispersion of dry powders (including effervescent powders) and their granulation with aqueous or organic solvents. The equipment is designed to achieve rapid mixing and the formation of consistent granules required for the production of high quality pharmaceutical tablets for solid dosage forms of medication. Good mixing and control of granule size leads to fast tableting speeds and high quality products with low rejection rate.

A Mix–Up may be defined as:

• An unplanned combination of various compounds.
• A mistake brought about wrongly identifying one material for another.

A mix-up can be caused by bad judgement or lack of attention to detail, i.e., human error. It can also occur though poor communication between personnel.

A big factor in choosing your Rotary Tablet Press will be the batch sizes you intend to produce with it.

While it might seem that the machine with the most output should finish every batch size in first, the table below demonstrates that is not the case.

The larger the machine the more parts there are to clean meaning the higher the labour costs.

One of the major problems that the tablet manufacturing companies faces is tablet sticking. This problem occurs when the granulation sticks to the punch surface causing deformed tablets, which is very costly not only for the manufacturers but also for the formulators. One way to alleviate this problem is using analytical method as well as create screening processes. Authorities or field experts are also looking for ways to create analytical models to identify the solutions quickly for specific problems.

Tablet binders are one of the most essential elements in the formulation of a tablet. Because they promote cohesiveness, the binders, also called adhesives, help the other ingredients in a tablet to mix together. Tablet binders are used to turn powder to granules; this is achieved through the process of granulation. During granulation, powder substances are accumulated to form larger particles called granules.

Coating tablets with a thin polymer film can be an effective way to give your products a professional edge. High quality tablets can be quickly and easily produced using a tablet coating machine and the correct excipients . Unfortunately several defects can arise with coatings. The following list provides helpful remedies for common issues that may be encountered.

The following is a brief operating and cleaning guide that can be used for most tablet de-dusting machines. It covers pre-start up, operation and cleaning, and lists some precautions that can be taken to help avoid contamination issues.

The design of tablets requires careful research and understanding especially with respect to the shape of the tablets. Even tiny variations can have a direct impact not only on the cost of production but also on patient’s acceptance, which can lead to either the success or failure of the product.

Here is a list of commonly used terms and there definitions. This it to help you understand and navigate our website more easily. We hope you find it useful.

If there is something that you feel needs adding to the list then please feel free to get in contact and we will add it.

It is time consuming and expensive for tablet manufacturers to inspect tooling equipment. That said, advancements in technology have made in-process inspections easier to carry out. Here we discuss some of the main technological developments that have facilitated an easier and less costly in-process inspection.

In today’s article we are going to show you how to make your own pills from home exactly step-by-step so if you ever wondered what is needed to go through this process you are definitely at the right place.