HSTP Roterende Tablet Pers
Vul uw gegevens in en ons team zal u zo spoedig mogelijk een offerte sturen.
|Number of stations||26||32||40|
|Tooling Specification||Euro D||Euro B||Euro BB|
|Max. Main Compression Force(KN)||100||80||80|
|Max. Pre-compression Force(KN)||20||20||20|
|Max. Tablet Diameter - Round (mm)||25||18||13|
|Max. Tablet Diameter - Shaped (mm)||25||19||16|
|Max. Filling Depth(mm)||16||16||16|
|Max. Tablet Thickness(mm)||6||6||6|
|Main Motor Power (kW)||11||7.5||7.5|
|Voltage Frequency||3Phase 380V 50HZ||3Phase 380V 50HZ||3Phase 380V 50HZ|
|Overall size (mm) LxWxH||1000x1200x1700||1000x1200x1700||1000x1200x1700|
How Much Profit Will This Machine Generate?
Are you able to calculate the amount of profit your business generates per tablet? If so, this calculator will be able to tell you how many hours you will have to run this tablet press to cover its investment.
It will also be able to tell you the amount of profit it will generate every hour you run this tablet press, which makes this calculator a powerful tool when deciding on which tablet press is right for you or your business.
Profit Generated Per Hour
This machine returns it's investment in hours
We kunnen u trainen in Bicester, in onze vestiging. Het duurt ongeveer een dag.
Echt snel. De gemiddelde kosten per tablet wanneer ze door een contractfabrikant worden gemaakt, bedragen £0.002 - £0.005, afhankelijk van hoe moeilijk het is om ze te drukken en de grootte van de batch. Dat betekent dat een TDP 5 zichzelf terug zal betalen bij slechts 380.000 tabletten. Bij 5000 tabletten per uur is dat maar 76 uur.
Yes, you can but there are a number of requirements that we need to fulfil first.
You will need to contact our team and provided them with a copy of all of your MSDS for all of the components of your mix.
We need to have a good understanding of your business and the challenges you are facing.
You will also need to book an appointment with the office that you would like to visit.
For more information please get in contact with the team: https://www.lfatabletpresses.com/contact
Yes. Very easily.
We have free lifetime technical support for all machines sold by LFA.
Just contact us with your machine serial number and we would be happy to help you with any problems.
Yes. You can order custom tooling here
As with any tablet press, it is good to have a particle size of around 80-60 mesh.
This would be large enough to avoid large losses and small enough to flow well through the machine. If the powder is finer than this then you are going to experience a larger level of loss.
If the particles are larger than this then it might not flow through the machine well and get caught as it is trying to enter into the die bore.
This being said every powder is very different and you will need to do tries to work out what is best for them.
There are a number of ways we are able to support you:
- Every machine comes with a full manual to be emailed to you after purchase.
- There is a large range of video tutorials to teach you how to use the press.
- The machine comes with lifetime technical support, you can call, Skype or email to get answers to your questions and problems.
- We also offer free training at any one of our regional offices.
If after all of this you are still struggling to use your press then we are able to come to you.
This is a service we do charge for.
More information on this can be found here: https://www.lfatabletpresses.com/services
Yes, the TDP range all have a weight adjustment for it.
It is the bottom of the two cogs on the lower drift pin assembly.
Here is a link to a video showing you how to tune up the TDP 5: https://www.youtube.com/watch?v=4dTscUdRJzQ
It is important to know that the exact weight of each tablet will vary from tablet to tablet.
A well-homogenized mix that has a consistent granule size should be able to achieve an accuracy of +/- 3% or less.
Get a capsule filler.
You will not be able to make tablets.
Click here for more information https://www.lfacapsulefillers.com/
We send out all machines with the local plug on and set up to run on the local power supply.
In order to determine whether or not your machine is still under warranty you will need to call or email the office the machine was purchased from and provide the serial number.
No, there are 3 specifications for Rotary Press Tooling and a number of different sizes that fall under them. These 3 specifications are RTP, Euro, and TSM. Under TSM and Euro tooling specifications, there are 4 common sizes: B, D, BB, and DB.
Our tooling specification guide can be found here: Tablet Press Tooling Specification Guide