Manufacturing tablets that have uniform shape, size, thickness and hardness requires that the press punches used be of similar length. This article talks briefly about how one can determine the punch length, correct measurement as well as the effects of wear and tear.
In the pharmaceutical manufacturing process, it is important that blend uniformity be achieved. If there is poor uniformity, the product can be rejected based on weight or punch pressure causing loss of revenue to the your business. In this article we talk about how to overcome this problem.
Hygrometers are important devices in the pharmaceutical world as it measures the relative humidity of the atmosphere, which can affect the products during the manufacturing process. The device includes two thermometer – the dry and the wet bulb. The dry bulb remains dry while a cotton wick that is dipped in water surrounds the wet bulb. In the measurement of humidity, the wet bulb plays an important role.
The term humidity and relative humidity has been used interchangeably and some people would even think that both of the terms mean the same. Although both may mean measuring the presence of water in the air, the difference lies in the method by which the measurement is taken.
The chipping occurs when the edges of the tablets break during the press process or during the handling and coating. Find the Causes And Remedies Of Chipping Related To Formulation Are As Follows
An article with bullet points to help you learn how to operate metal detectors and properly clean them.
It is time consuming and expensive for tablet manufacturers to inspect tooling equipment. That said, advancements in technology have made in-process inspections easier to carry out. Here we discuss some of the main technological developments that have facilitated an easier and less costly in-process inspection.
Nowadays, it is easy to make your own supplements and vitamins. It may sound complex but actually is quite easy and much more affordable than store brought supplements. To make one’s own supplements, all one needs is an empty capsule made of gelatin or
As the influx of new products invade the tablet press industry today, tablet manufacturers together with tooling vendors are constantly innovating the tablet compression technology. The article below discusses how the industry uses technology in determining the maximum compression force for tooling equipment.
Suggest Our Next Article
Can’t find what you are looking for? Let us know and we’ll add it to our article section
Before shipping, it is imperative that the vendor does a proper Factory Acceptance Test or FAT in order to prevent any problems during the product installation. Below is a sample of what should be indicated in the FAT protocol.
As our world becomes more connected and information is shared quite easily in the internet today, people are more curious about where their food comes from. One question that begs to be answered is where gelatin capsules are made of and this is an interesting especially for individuals who pay attention to what they eat. Gelatin capsules are made of natural ingredients and below are some interesting things on how the capsules are manufactured.
If you have never changed a die or you need to refresh your knowledge, this How-To will tell you to step by step how to change your TDP die.
There is a diagram of a desktop press at the bottom to help you identify the location of the parts you will need to remove during this process.
The multi tooling equipment has long been used in the pharmaceutical industry and has been in existence for more than 150 years. During the start of the tablet compression industry, companies use single station presses during production and these were outfitted with
The packing process is an integral part of the manufacturing process for pharmaceutical products. Below is a summary of good practices that may help streamline the packing process.
This article covers general GMP procedures. Including QA staff must do a round of the plant area making sure that the plant adheres to the cGMP and fill up the checklist provided by the company. Head or In-charge personnel should review the plant audit and discuss this with the person in charge of the plant after which the audit report will be closed.
The principles of GMP are a follows, the structure, device and equipment should be designed, installed, placed, operated and maintained as per its intended use and purpose. Integral system whose consistency in performance and having an impact to product quality should be validated whenever appropriate such as the air handling system, water purification, compressed air system and stem system.
When people first think of tablet or pill presses they think pharmaceuticals, supplements, vitamins and minerals or just medicines. But tablet making machines can be used for other purposes.
Drying in the pharmaceutical industry involves the extraction of liquid and other liquid solvents from the materials or granules using air current or heat. Fluidized bed dryer is one of the equipment used to dry the granule particles using the FBD finger bag.