TDP Tooling Case
The TDP Tooling Case is perfect for for your GMP and ISO procedures. The TDP Tooling Cases are made to fit any size TDP Universal Tooling. The top and bottom punches rest safely inside the die cavity and are held down on each side of the case to limit any movement during shipping.
To remove your tooling from the case, simply grab a hold of the center die and wiggle to release the pincers from the punches. Aim to be careful that you don’t pull too hard, that you may lose control of your tooling and drop it.
The TDP Tooling Case provides and air tight seal to protect from outside contaminates. The tooling case comes in 3 different colors:
- Clear for standard storage and to easily identify which tooling is in the case.
- White for moving your tooling in and out of the clean room.
- Red for your dirty tooling as it comes out of machine during a cleaning.
When storing your TDP tooling in their case, be sure to add some mineral oil to the tooling to help protect it even more from the elements. Along with the air tight seal and mineral oil, your tooling will now be easier to transport, protect and identify.
For more information on the TDP Tooling Case or any other products, please get in contact with our team.