Diossido di Silicio

54,99 USD
Solo %1 rimasto/i
SKU
5060477552278
Prefer to pay by Invoice? Request Quote

Il biossido di silicio, noto anche come silice, è un eccipiente. È multifunzionale e renderà il processo di produzione più semplice. Il biossido di silicio è un ingrediente inerte. Ciò significa che non reagisce con gli altri ingredienti che si utilizzano o sostanze del corpo. Rende semplice la produzione e la digestione. Ha un punto di fusione e di ebollizione elevato, ed è insolubile nell'acqua. Ci sono gradi naturali e gradi sintetici, ma ognuno ha la stessa identica composizione chimica. Viene utilizzato spesso perché migliora la scorrevolezza e non forma incrostazioni sulle attrezzature.

Il biossido di silicio assorbe l'umidità dal suo ambiente. I produttori di cosmetici e alimentari, lo utilizzano spesso per questo motivo. Queste applicazioni sono desiderate anche dalle aziende farmaceutiche. I diversi vantaggi lavorano assieme per creare un processo produttivo semplice e regolare.

Il biossido di silicio presenta una porosità elevata, che consente di assorbire fino a 300 g di liquido per 100 g di silice. Questo significa che gli ingredienti liquidi possono trasformarsi in polveri scorrevoli con facilità. Agisce come glidant, una sostanza utilizzata per migliorare le qualità di scorrevolezza. Garantisce che il prodotto scorri attraverso il macchinario e non si attacchi alle attrezzature. Utilizzando il silice, si aumenta la stabilità delle API sensibili all'umidità. Una API è un "ingrediente farmaceutico attivo". Questa capacità consentirà di ridurre le quantità di tracce di umidità, che causano il degrado dei macchinari. Presenta caratteristiche di assorbimento uniche. Questo assicura una compressione rapida, grazie al fatto che non si attacca.

Il biossido di silicio è un elemento interessante che si trova in abbondanza sulla terra. E' ovunque e rappresenta il 60% della crosta terrestre e il 93% delle rocce conosciute. È noto anche come quarzo. Si trova nei tessuti del nostro corpo, nelle piante e nel cibo. E' fondamentale per la saluta di ossa, pelle, capelli, denti e unghie. La carenza di biossido di silicio può causare la formazione di ossa delicate, pelle e denti insani.

È importante maneggiare correttamente biossido di silicio. Questo aumenta la durata del prodotto sullo scaffale e mantiene al sicuro le persone. Può irritare gli occhi e la pelle, se esposti ad esso. Evitare l'inalazione e indossare la maschera mentre si maneggia. Se il prodotto viene maneggiato correttamente, resta in ottime condizioni fino a quando non è pronto per l'uso.

Il biossido di silicio è un popolare eccipiente multifunzionale. È efficace e rende il processo di produzione più efficiente.

Nome

Valore

Numero CAS

7631-86-9

Formula molecolare

60.08 g/mol

Aspetto

Polvere bianca

Stato fisico

Solido

Conservazione

Conservare a temperatura ambiente

Punto di fusione

1,713 °C

Densità

2.648 (α-quarzo)
2.196 (amorfo) g·cm-3

Peso molecolare

60.08 g/mol

Documenti

Dati intolleranza
Specifiche tecniche



Scrivi la tua recensione
Stai recensendo:Diossido di Silicio
Are all excipients safe for all ages to consume?

Yes, it does not matter what age, size or sex the person consuming the products is. It is, however, important to check the intolerance data.

Are all the excipients safe for human consumption?

Yes, all of the excipients are safe for human or animal consumption. There are some precautions that should be taken when handling them and there are some people that might have intolerances to some of them. Information on this can be found in the products MSDS and Intolerance Data Sheet. This can be found in this section for every excipient.

Are there any known allergens or health risks?

Yes, there are all of them can be found in the intolerance sheets for each product. The intolerance sheets can be found here: https://www.lfatabletpresses.com/product-data

FFFFFF ​

Can I get a better price for excipients than is listed on the website?

Yes, we have bulk pricing for all of our excipients, and these can be found in this section. We offer bulk in 500 kg, 1 ton, 2 ton and 5 ton lots. The prices are set on these quantities as these are the amounts that will fit on pallets.

Can I have a CoA for my Excipient?

Yes. CoA stands for Certificate of Analysis this is also known some times as an MSDS (Material Safety Data Sheet) all of the information contained in a CoA is inside the MSDS for every LFA product which is emailed to you after purchase.

Dissolving rate? Any known factors that can affect the rate, speed up or slow down the breakdown of a tablet?

Yes. There are two things at play here. You can get hygroscopic and hydrophobic excipients. Hygroscopic means that they take on water quickly, while hydrophobic means that they repel water.

There are products know as supper disintegrants. These products help the breakdown of tablets. At the moment LFA does not sell any supper disintegrants.

Magnesium stearate is hydrophobic this means that it will slow the breakdown of a tablet.

However, it is used in such small amounts that most of the time it will not make a difference to our customer's products. If they would like to be sure then they should conduct what is known as a disintegration test.

How long is the storage period of each excipient? What is the shelf life?

Firmapress - 2 years form batch date.
Dextrose - 3 years from batch date.
Dicalcium Phosphate - 3 years from batch date.
Microcrystalline Cellulose -
Magnesium stearate -
Lactose - 2 years from batch date.
Silica Dioxide - 2 years from batch date.

How should I clean contact parts that have come into contact with my excipients or active ingredients?

here are 6 steps that should be followed as a general rule of thumb when cleaning contact surfaces that have come into contact with powders:

Dry Clean - First you need to remove as much of the dry powder as possible. You can do this using a hover/vacuum. Make sure that the vacuum you are using has a filter good enough to handle fine dust.

Wet Clean - Next you need to perform a wet clean. This can be done with warm water and soap or if available an ultrasonic cleaner.

Rinse - Next you need to rinse off any soap with potable water (drinking water). You do not have to do this if you used an ultrasonic cleaner in the last step. It is important to ensure that all parts are thoroughly dried immediately after washing to avoid any rusting.

Sanitise - Next you need to sanitise the surface. This step is recommended by the FDA. There are a number of sanitising solutions available designed to be applied and left on.

Lubricate - You now need to lubricate any parts that require it. This should be with the appropriate grade oil or grease considering your use and greasing chart. Store - Finally store any of the parts in a cool dry place. If you are storing them on the machine then make sure the machine is in a temperature controlled environment with low humidity.

What is the mesh size of your excipients? etc.

Dextrose - approx 100 mesh
Dicalcium Phosphate - approx 100 mesh
Microcrystoline Cellulose - approx 120-200
Magnesium sterate -
Lactose - 80 mesh
Silica Dioxide -
Firmapress - 100-200 mesh

What kind of agent is each excipient?/ What is the main use of each excipient?

Dextrose - Sweetener, binding agent, good for chewable tablets or candy.

Microcrystalline Cellulose - Binder, filling agent. Good at binding tablets and making them bigger. It can also be used as a filler for capsules.

Magnesium stearate - Dry Lubricant. This stops products from getting stuck to the tooling. It can also help with powder flow issues and caking issues.

Lactose - Binder, sweetener and bulking agent. It has a large mesh so it flows well but most people do not like it because of the intolerance issues.

Silica Dioxide - Flowing agent. This assist powders in flowing smoothly through the machines. It also helps with cacking issues where powders get stuck to the machine.

What kind of condition should excipients be stored in?

Firmapress - 2 years form batch date.
Dextrose - 3 years from batch date.
Dicalcium Phosphate - 3 years from batch date.
Microcrystalline Cellulose -
Magnesium stearate -
Lactose - 2 years from batch date.
Silica Dioxide - 2 years from batch date.

Which excipient should I add if the product doesn't bind well?

If your product does not bind well then we would recommend using MCC. This can be used in any % the limiting factor is the size of the tablet.

If the amount of MCC you would have to use would be too much or if you do not want to use MCC then you have 3 other options: Ask your supplier for a directly compressible or tabletable grade of your product. Spray dry your product. Wet granulate your product.

Which excipient should I add if the product is sticky?

If your product is sticky then you will need to add a dry lubricant to your mix. For this, we recommend magnesium stearate.

We do not recommend that you add more than 1% to the mix as more than this can cause capping. If your product is still sticky at this point then we would recommend looking into granulation.

Which excipient should I add if the product/API is clumpy?

If your product or API is clumpy then you will need to add an anticaking agent. For this, we recommend silicon dioxide. We only recommend adding a maximum of 2% of this to the mix

Frequently Bought Together
© 2024 LFA Machines Oxford LTD. Tutti i diritti riservati.