Prensa para Comprimido de Mesa TDP 0
- Entrega Grátis
- Peso Leve
- Design Ergonômico
O TDP 0 é nosso modelo introdutório à gama TDP. O TDP 0 é perfeito para quem deseja fazer suas própria suplementos ou testar uma nova gama de produtos. O TDP 0 é leve, fácil de se mover e facilmente armazenado fora.
Connect with Our Team
If you have a question or would like more details on the Prensa para Comprimido de Mesa TDP 0, please complete the form below and someone from our team will be in touch with you soon.
O TDP 0 é nosso modelo introdutório à gama TDP. O TDP 0 é perfeito para quem deseja fazer suas própria suplementos ou testar uma nova gama de produtos. O TDP 0 é leve, fácil de se mover e facilmente armazenado fora.
Main benefits at a glance:
- Small and light weight, making it far more portable than electric powered tablet presses
- Advanced engineering makes it easy to produce high quality tablets without electricity
- Up to 10mm diameter round tablets
- Easy to use and maintain
- Interchangeable dies
- No running costs
- Well engineered, reliable machine for a wide range of applications
Features
The striking features of the TDP 0 are its light weight, compact size, easy portability and advanced design that makes it possible to produce good quality tablets without an outside power source. Operating completely without electricity, and with a very efficient mechanism to turn manual power into pressure, the TDP 0 is the perfect tablet press for any application that requires a simple but effective tabletting solution in the field or at a low running cost.
With no ongoing expenses beyond the occasional drop of lubricating oil, the TDP 0 is highly cost effective. Yet it can take a wide range of dies, and produce properly compacted tablets of a high standard.
TDP 0 Tablet Press in Use
Before using the TDP 0 you might imagine that it would require a lot of effort, but nothing could be further from the truth. Once you have installed the die and filled the machine with powder you simply crank the handle. It only takes a modest amount of effort, yet produces first rate tablets. It is easy enough to turn out twenty tablets a minute, and with a little practice you can readily manage forty a minute.
If you want to adjust the tablet thickness or hardness, both are easy to achieve with just a couple of movements.
That really is all there is to it. The machine itself weighs about 24kg, and is small and compact enough to lift without too much difficulty. Compared to many hundreds of kilos in weight for most large commercial machines, the TDP 0 is a very light weight solution. Certainly, it is light enough to move around a hospital, laboratory or university faculty as needed.
LFA's View
The TDP 0 is a clever piece of engineering that makes it exceptionally easy to churn out tablets at a low cost and in almost any location that has a flat working space. The design is compact and eminently storable when not being used, yet it is highly effective in operation. Stable, surprisingly efficient in its conversion of manual energy into tabletting pressure, and simple to maintain, this is the ideal tablet press for small scale tabletting where the cost and space associated with larger machines cannot be justified. Yet it produces excellent tablets that are strong and durable.
| Name | Value |
|---|---|
| Number of dies | 1 |
| Production capacity | 30-50/min |
| Diameter of the tablets | 5-10 mm |
| Thickness of tablet | 2-6 mm |
| Max pressure | 3.1 kN |
| Number of filling stations | 1 |
| Double layered tablet | No |
| Weight | 25.4 kg |
| Height | 51 cm |
| Width | 30 cm |
| Depth | 22 cm |
How Much Profit Will This Machine Generate?
Are you able to calculate the amount of profit your business generates per tablet? If so, this calculator will be able to tell you how many hours you will have to run this tablet press to cover its investment.
It will also be able to tell you the amount of profit it will generate every hour you run this tablet press, which makes this calculator a powerful tool when deciding on which tablet press is right for you or your business.
Profit Generated Per Hour
This machine returns it's investment in hours
Esta é uma pergunta muito comum, como todas as máquinas são extremamente semelhantes, mas que, igualmente, têm características diferentes.
A maneira mais fácil de dividir estes seriam em máquinas automáticas e manuais.
O TDP 0 é o modelo manual e requer que você para ativar a alavanca ao lado para produzir os tablets. Este tem o mínimo de pressão e é o modelo de nível de entrada para o TDP gama.
O TDP 1.5, TDP 5 e TDP 6s são todas as máquinas automáticas que são movidos por um motor elétrico. O TDP 1.5 é o modelo de nível de entrada para as máquinas automáticas que têm o mínimo de pressão na 15kn também é limitada no tamanho dos comprimidos pode produzir. O TDP 5 é o nosso modelo mais popular e pode produzir cerca de 5.000 comprimidos por hora. O TDP 5 tinha 50kn de pressão e pode produzir tablets até 22mm de diâmetro. O TDP 6s é o topo de gama da máquina e é mais adequado para a situação irregular em forma de comprimidos. O TDP 6s também tem um pouco mais de pressão no 60kn e é mais adequado para certos produtos que não fazem tablets tão facilmente.
Sim, oferecemos treinamento. Será em Bicester, em nosso escritório. Levará cerca de um dia.
A TDP 5. Com certeza este já é o modelo mais popular há algum tempo. Temos clientes que voltam e se aprimoram com a RTP 9 (normalmente após alguns anos), mas a maioria dos clientes começam com a TDP 5.
No, sorry, that is just is not possible.
The maximum pressure of a TDP 0 is 3.1 kN.
"The machine is made from a number of materials. The hopper is made from sheet steel, the tooling is made from S7 steel, the boot is cast from brass and has a chrome plate coating, the base is cast from FC250 and coated in an enamel paint. "
The upper drift pin assembly is used to adjust the pressure. You can watch a video on this here: www.youtube.com/watch?v=pc2gfDU3NiQ
Here is another video which tells you how to set up a TDP ready to press: www.youtube.com/watch?v=4dTscUdRJzQ
Yes, you do get a die with the machine. Every machine comes fitted with a die.
If you would like you can get this customised with your logo or lettering but it takes 6-8 weeks.
Or, we have a standard 8mm round, bevelled edge with breaker installed in the machines in stock.
Yes, you can.
You are able to make any shaped tablet up to the maximum diameter of this tablet press which can be found under the "specifications" tab.
We are able to customise tooling to include lettering, numbering and logos. If you would like customised tooling please fill out our custom tooling form: https://www.lfamachines.com/custom-punch-dies-tooling
We have been able to get speeds of around 30-50 tablets per minute, but the machine will only run for as long as you have the energy to keep it turning.
It is hard to keep up 30-50 tablets per minute for long.
If you need to make more than this then we recommended the TDP1.5 or TDP 5.
No, it does not need to be bolted into position but we do recommend it. If the machine is not secured in position by bolts or another method then it is more likely to shake a bolt loose, resulting in varying tablet weights. On top of this, the vibrations are likely to make the machine sound louder.
The machine does not come with bolts because we do not know the thickness of your surface.
This will really depend on the bulk density of your tablets. Watch this video for more information
The best way to describe this is with a trick question: What weighs more, a ton of feathers or a ton of lead?
The answer is neither since they both weigh a ton, but their dimensions are different. This is the same with powders. You can have some that are like sand and some that are light and fluffy, so compressing them to the same size does not always mean that you will yield the same weight results because their particles hold weight differently.
This is a common question, and we have tools to help you:
A video on the differences between the different TDP's - www.lfatabletpresses.com/videos/tdp-range
The Right Machine For You Questionnaire - https://www.lfatabletpresses.com/tablet-press-questionnaire
These will explain the different machines, and give you a much better idea. If you are still unsure, please do reach out, let us know what you are making and the quantity, and we will help to guide you through the process.
No, the TDPs are not CE certified. To acquire this certification, they would have to be installed in a protective cage.
Yes, the contact surfaces are all food and pharmaceutical safe.
They are made from a combination of, stainless steel, chrome coated brass and the steel used for your tooling (often S7).
As such they are all compliant with most rules for food or pharma manufacturing.
We strongly recommend that you check your local laws as these do vary from state to state and country to country. If in doubt reach out, and we will be happy to find out.
We would recommend using goggles, a dust mask and gloves at a minimum, but you may require a lot more depending on the products that you are working with, and your local health and safety laws.
We would recommend cleaning down the machine and leaving it re-greased after every use. This will ensure the longest life possible.
Here is a video on cleaning the TDP 5.
When greasing the machine, avoid getting any grease near the tooling or pressing surfaces, as this will get into your tablets and affect your powders.Grease the top cam well, then apply a small amount to the upper drift pin assembly and the lower timing rod.
More information on greasing your machine can be found here: TDP 6s Lubrication Schedule
It is important to know two things:
Firstly, TDP Universal Tooling came into effect in 2018. Machines brought from LFA before this time may be slightly different sizes. We always recommend checking the size of your tooling before placing your order.
Secondly, a number of companies make unofficial TDP tablet presses.
They do not always conform to the same sizes, tolerance or quality as LFA TDPs or tooling. If you bought your press from someone else other than LFA, we are not able to guarantee that our tooling will fit.
The length of the warranty on any of the TDP range machines is 1 year from the date of purchase.
This warranty covers spare parts and excludes tooling and maintenance labour from LFA for machine services.
When you receive your machine, you will be given a serial number that will also be stamped onto the press. You will be able to use this if you ever need to make a warranty claim.
Full details on the LFA warranty can be found here: Warranty | We Have You Covered
The most common part to wear out on the machine is the boot. This comes in direct contact with the die cavity and can be hit or chipped by the upper and lower punches. This is made of brass so that the tooling is protected in the event of a collision. Because of this, the boot is soft and will wear over time. If anything, we recommend keeping a spare to avoid losing production time.
We also recommend that you keep at least 1 spare set of tooling as this can break or wear over time.
LFA aims to hold all major spare parts and tooling in stock so that they are ready to ship out in the event that you need them. The lead times on sold out parts, however, can take up to 6-8 weeks
Yes, you can, but there are a number of requirements that we need to fulfill first.
You will need to contact our team and provide them with a copy of all of your MSDSs for all of the components of your mix.
We need to have a good understanding of your business and the challenges you are facing.
You will also need to book an appointment with the office that you would like to visit.
For more information please get in contact with the team: https://www.lfatabletpresses.com/contact
Yes. Very easily.
We have free lifetime technical support for all machines sold by LFA.
Just contact us with your machine serial number and we would be happy to help you with any problems.
Yes. You can order custom tooling here
As with any tablet press, it is good to have a particle size of around 80-60 mesh.
This would be large enough to avoid large losses and small enough to flow well through the machine. If the powder is finer than this then you are going to experience a larger level of loss.
If the particles are larger than this then it might not flow through the machine well and get caught as it is trying to enter into the die bore.
This being said every powder is very different and you will need to do tries to work out what is best for them.
There are a number of ways we are able to support you:
- Every machine comes with a full manual that is emailed to you after purchase.
- There is a large range of video tutorials to teach you how to use the press.
- The machine comes with lifetime technical support. You can call, Skype or email to get answers to your questions and problems.
- We also offer free training at any one of our regional offices.
If after all of this you are still struggling to use your press, we are able to come to you. This is a service we charge for.
More information on this can be found here: https://www.lfatabletpresses.com/services
Yes, the TDP and RTP range all have a weight adjustment for it.
on the TDP it is the bottom of the two cogs on the lower drift pin assembly.
Here is a link to a video showing you how to tune up the TDP 5: https://www.youtube.com/watch?v=4dTscUdRJzQ
Here is a link to a video showing you how to tune up the RTP 9 or the RTP 118: https://www.youtube.com/watch?v=YJFt5AFJ1hw
It is important to know that the exact weight of each tablet will vary from tablet to tablet.
A well-homogenized mix that has a consistent granule size should be able to achieve an accuracy of +/- 3% or less.
There are three reasons to granulate your formula:
1. To improve the flowability of your formulation.
2. To make your formulation more compressible.
3. To ensure a consistent spread of API throughout the formulation.
If you would like to find out if your mix needs granulation then we do have a tablet formulation service available.
You can find out more about the tablet formulation service here: https://www.lfatabletpresses.com/services
Get a capsule filler.
You will not be able to make tablets.
Click here for more information https://www.lfacapsulefillers.com/
That depends on the country you are located in.
In the EU and UK no. You do not need anything to buy the press.
In the USA we have to file a piece of paperwork with the federal government when we sell the press.
We, however, do all of this paperwork for you and do not need to do anything.
The only countries that require a license, as far as we know, are Canada and Australia.
If you are located in Canada then we recommend that you contact Health Canada prior to placing your order. Details regarding the import process can be found at the following link: Importing and registering pill presses (designated devices)
The document you need to fill out and file for a purchase originating in Australia is called a B712. This can be found at: https://www.abf.gov.au/form-listing/forms/b712.pdf. If you would like to speak with one of our team about this, then please get in contact.
This is a hard question as it is done on personal strength and the pressure is adjustable. If you think about it, it is as hard as possible before you can't make the rotation any more. This is the same as a TDP with a motor, the max pressure is as much as the motor can exert before the press jams.
Technically you can use multi-tip tooling with the TDP0, but as the maximum diameter size is 10mm, all of the punches would have to fit into this space resulting in very small tablets. They would have to be around 3-4 mm because below this they would be too small and above this, they would be too big. On top of this multi-tip tooling is incredibly expensive. It would be worth buying a DTP 25 for this type of tooling.
There are a few interchangeable parts if both machines have been made by LFA Machines. From the TDP 0, this includes the tooling, the lower drift pin assembly, and its corresponding set of cogs.
The most important fit to check for is tooling that you may have previously purchased, because the base plates have been redesigned to fit the universal standard tooling die.
More information on the TDP Universal Tooling Standard can be found here: Tooling | Punch & Dies for TDP Pill Presses
All other parts are custom to this press.
These gears are known as cogs and are used to tune the press by setting the tablet weight and ejection height. The upper drift pin assembly is used to adjust the pressure.
You can watch a video on this here: Setup the Fill Depth, Punch Pressure & Ejection Height on a TDP 5 Tablet Press
The ideal condition for manufacturing tablets using the TDP 0 is a cool, clean, and dry environment. For the best results, we recommend using directly compressible or granulated powders.
We recommend a strong and sturdy table that can hold more than 24 kg, since you will also be operating the machine on it. It is useful if you can bolt the machine down or use a set of clamps to secure it in place.
The TDP 0 does not have to be bolted down, but we highly recommend it. The machine does not come with bolts, but this can be determined based on the thickness of your work surface.
To calculate the length of the bolt required, first measure the thickness of your surface, and then add 35 mm for the thickness of the TDP 0 base and the thread of the nut and the washers. You will then need to order 4 x M6 bolts in the length that you calculated, as well as 4 x M6 nuts and 8 x M6 washers.
This will be all you require to bolt down the press securely.
The maximum tablet diameter possible on a TDP 0 is 10 mm, but this will vary depending on the properties of your tablet mix.
Yes, the TDP 0 is an extremely simple machine. You will find that you can strip it down and clean it with very little effort.
Yes, you can, but we do not sell larger hoppers. Also, since this machine is operated manually, it might not be helpful because of the time it takes to empty a full hopper of powder. Because of this, we recommend refilling your hopper as you go to avoid particle separation.
It is a very sturdy machine. However, if it arrives in less than perfect condition, please contact us and we will make sure to get you back on track.
The TDP can operate as long as the user can rotate the arm on the machine.
This will depend greatly on the products you are pressing. If you are making food or pharmaceutical products, then you are going to need food or pharmaceutical safe cleaners.
When you clean the machine, make sure that it is completely dried and oiled afterwards to avoid any rusting of key parts.
More information on cleaning and maintenance for the TDP 0 can be found here:
Yes, some parts are interchangeable if both machines have been made by LFA Machines. The upper drift pin assembly and the lower drift pin assembly will fit.
The most important fit to check for is tooling that you may have previously purchased, because the base plates have been redesigned to fit the universal standard tooling die.
More information on the TDP Universal Tooling Standard can be found here: Tooling | Punch & Dies for TDP Pill Presses
Yes. Some of them. There are a number of parts that are able to be changed between the different TDP ranges. This includes the tooling, a lot of the upper and lower drift pin assemblies and the boot bolt and spring.
In order to determine whether or not your machine is still under warranty, you will need to call or email the office the machine was purchased from, and provide the serial number.
Yes, this could be down to corrosion or due to oxidation of your product. We would highly recommend taking your tooling out of the press and cleaning it at the end of every production run.
We would also recommend polishing the tooling to keep the surfaces clean and less likely to cause picking or capping.
Yes, this can happen because the boot bolt and spring have been screwed too far into the press or have not been screwed in far enough. It is important to make sure that the bolt is in the correct position before over tightening the set screw.
It should be pointed out that it will not affect the operation of the press if it is damaged.